1-Wire Shutter Pro shutter control V4

1-Wire Rollladensteuerung Shutter 11231
Please inform me as soon as the product is available again.

Quantity Unit price
To 49 €53.52 *
From 50 €50.84 *

Prices incl. VAT plus shipping costs

Delivery time 1-3 Workdays

  • 11231
Shutter control / Shutter Pro for 1-Wire bus and push button interface With the 1-Wire... more
Product information "1-Wire Shutter Pro shutter control V4"

Shutter control / Shutter Pro for 1-Wire bus and push button interface

With the 1-Wire Shutter Pro module you can easily control a roller shutter motor, external blinds or awnings manually or automatically via the 1-Wire network. Thus a central and convenient control as well as local decentralized control is possible. The output of the 1-Wire Shutter Pro is switched by relays, which are electrically interlocked with each other. This can result in an up and down command for the tubular motor at the same time. In addition, a safety shutdown is provided, which automatically switches off the motor after 120 seconds.
New, a runtime can now be transferred via software (1-Wire interface) in addition to an Up or Down command. Travel times of 250ms, 500ms and 750ms for tilting movements and 1-60 seconds for normal running operation can now be transferred.

New: The status of the output (relay status) and the button inputs is output via the 1-Wire interface.With additional isolating relays, shutter groups can be controlled via a module.

product details:
Convenient manual operation via push-buttons for up and down, which can be installed in the window area or next to a room door, for example. A harmless DC voltage of 10-30V is used to operate the external pushbuttons. Automatic operation via 1-Wire commands via the data interface.
An integrated safety circuit automatically switches off the roller shutter motor after 120 seconds. This provides additional protection for the motor in case of a defective limit position switch.
Note: Module is only intended for roller shutter motors with integrated limit switches.



Control system
  • 1-Wire interface (DS2408 command set)
  • Manual operation by push button on top of the module
  • Digital / binary input for external push buttons (manual operation)
Up / Down times per 1-Wire interface
  • 250ms, 500ms and 750ms for tilting movements of laminations and external blinds Shading
  • 1 - 60 seconds in 1 second steps for up and down movement
  • 120 seconds per automatic safety stop (no time input required)
Functions

Module function switchable for roller shutters or lamella or external blinds

Advertisements LED display Up / Down

Digital / binary input for external push buttons
(manual operation)

10-30VDC max. 10mA, electrically isolated
Switching power/current 1150VA, 5A continuous current (resistive load)
Operating voltage
5 - 230V direct or alternating voltage
Connection Screw terminals for cable cross sections up to 2,5qmm
Supply voltage +12VDC, max. 20mA
Interface 1-Wire interface, three-wire system with ground/GND, Data and +12V
1-Wire interface
DS2408 command set
Dimensions 2HP, 32 x 71x 90mm (WxHxD)
Connection Screw terminals
Scope of delivery Finished device, operating instructions

Controlled by 1-Wire controller 1 / 1-Wire gateway by command "Up" and "Down" with time function. For details, please refer to the programming manual for the 1-Wire controller / 1-Wire gateway / Station-200
. convenient software modules are available for free download for integration into IP-Symcon, 1-Wire controller and ESERA Station 200. For details please refer to the category "Compatible controllers / IP-Symcon".

Read, write and discuss reviews... more
Customer evaluation for "1-Wire Shutter Pro shutter control V4"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed