Wind sensor Pro 200, wind turbine

€149.90 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • 20020
Wind sensor Pro 200 with heating With the compact and professional wind sensor Pro 200, the... more
Product information "Wind sensor Pro 200, wind turbine"

Wind sensor Pro 200 with heating

With the compact and professional wind sensor Pro 200, the current wind speed can be recorded and, e.g. in the event of gusts of wind, it can provide information via the system control for retracting an awning or raising roller shutters or slats. The wind sensor Pro 200 is an optimal environmental sensor for recording wind speed for weather recording.
For operation in winter the wind sensor Pro 200 is equipped with a heater. This prevents icing and thus a failure of the wind sensor.

All bearings and screws are made of weather-resistant stainless steel and are therefore suitable for professional use in weather stations.
Via the S0 interface (pulse output) pulses are output depending on the wind speed. 4 pulses are emitted per revolution.
The wind sensor Pro 200 has a pulse output and is designed for connection to the 1-Wire Dual S0 counter module (Art. No. 11211).
It is weatherproof and has an approx. 3 meter long connection cable.
A mast holder, wall bracket and mounting masts are available as accessories.

Application

  • Protection of awnings, roller shutters and blinds / slats by gusts of wind
  • Recording of the wind speed for weather data acquisition

Assembly

  • Mounting on 50mm mast (antenna mast)
  • Wall or roof bracket
  • Flat roof mast
  • Cable length max. 10m to S0 counter

Measuring range

0 - 50m/s (0 - 180 Km/s)

Output signal sensor

4 pulses per m/s

Electrical values

  • Heating: 24 V AC or DC approx. 0.15W
  • S0 interface (reed contact, normally open contact)
  • 4 pulses per revolution
  • 1 pulse corresponds to 0.25m/s
Connection

approx. 3m cable, 4-wire

Evaluation

Pulse output e.g. for 1-Wire S0 counter 11211 See connection example (Download)

Dimensions

approx. 210 mm x 80mm (height x width) Wind turbine Ø 160 mm

Accessories

Pole mount, wall bracket, pole for flat roof

Scope of delivery

Wind sensor without mounting bracket

Function: Sensorik
Assembly: Aussenbereich, Dachmontage
Measured values: Wind, Windgeschwindigkeit
Read, write and discuss reviews... more
Customer evaluation for "Wind sensor Pro 200, wind turbine"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed