1-Wire 8-Fach Schaltmodul, Leiterplatte ohne Bauteile
Unbestückte Leiterplatte zum Aufbau eines 1-Wire 8-Fach Schaltmoduls.
Mit dem 1-Wire 8-Fach Schaltmodul können 8 Gleich- oder Wechselspannungsverbraucher geschaltet werden. Das Gerät ist in zwei Gruppen zu je 4 Kanälen aufgebaut. Jede Gruppe hat einen getrennten Stromeingang, der mit je 5A abgesichert ist.
Anzahl Kanäle
8
Schaltstrom
5A pro Ausgang, maximal 5A pro 4-Fachgruppe
Schaltspannung
Gleich- oder Wechselspannung bis 230V
Einbau
Für Hutschienengehäuse und Schaltschrankeinbau vorgesehen
Anschluß
Schraubklemmen für 1-Wire Bus und Schaltkontakte (bis 2,5qmm möglich)
Absicherung
Sicherungen innenliegend, 2 x Micro Fuse 5A/T
Versorgungsspannung
5V und 12V
Stromaufnahme
5V ca. 1mA, 12V ca. 100mA (alle Ausgänge aktiv)
Schutzklasse
II
Lieferumfang
Unbestückte Platine in Industriequalität ohne Bauteile oder Gehäuse. Bauanleitung per Download
Hinweis: Auf der Platine müssen SMD-Bauteile gelötet werden.
From
€8.01*
Product number: 11806
Instantly available
Shipping until , if you place your order within the next .
1-Wire 8-fold switch module display board
Unassembled printed circuit board (display board) for the assembly of an 8-fold switching module
Display board for mounting the 1-Wire 8-fold switch module
Installation: Designedfor DIN rail housing Dimensions: 65 x 55mm (WxH) Scope of delivery: Unassembled industrial quality board without components or housing. Building instructions per download
Further information, like program examples, data sheets or drivers can be found in our download area
From
€5.31*
Product number: 11802
Instantly available
Shipping until , if you place your order within the next .
1-Wire 3-fold analog input, 0- 5V or 0 - 10V(Unassembled printed circuit board for the construction of a 1-Wire 3-fold analog input)
With the 1-Wire analog input module, three DC voltage sources can be measured independently of each other. As an example, pressure sensors, brightness sensors or other transducers can be read in. The inputs are not isolated from the 1-wire bus and have a ground potential. The module is only intended for the connection of isolated DC voltage sources.The measuring inputs have reverse polarity protection, overvoltage protection and input filters. The measuring range (0-5VDC or 0-10VDC) can be switched by software.
number of channels
3
Measuring input
0-5VDC or 0-10VDC
Input resistance
Input resistance 200k
Supply voltage
5V and 12V
Power consumption
approx. 15mA (all inputs active)
Connection
Screw terminals for 1-Wire bus and input voltage
Isolation
No isolation between input and 1-Wire bus
Installation
Designed for installation in DIN rail housing and control cabinet installation
1-Wire device
DS2450(4-fold analog input)
Protection class
III
Scope of delivery
Unassembled board in industrial quality without components or housing. Building instructions per download
Note: SMD components must be soldered on the board.
From
€8.01*
Product number: 11810
Instantly available
Shipping until , if you place your order within the next .
1-Wire Dual Digital Input, Board
Unassembled printed circuit board for the construction of a 1-Wire digital input.
With the 1-Wire dual digital input module two inputs can be monitored independently of each other. A pump or lamp can be monitored as an example. The inputs are connected in parallel to the consumer to be monitored. The dual input module is designed for three variants:- 230V AC voltage - 24V DC voltage - 5V DC voltageConnection: screw terminals for 1-wire bus and input voltageSupply voltage: 1-Wire bus with 5V and 12VCurrent consumption: 5V approx.1mA, 12V approx. 5mA (both inputs active)Installation: Designed for control cabinet installation (top hat rail)Protection class: IIAssessories: Top hat rail housing (HUT 2)Scope of delivery: Unassembled board in industrial quality without components or housing. Building instructions per downloadNote: Small SMD components must be soldered on the board.
From
€8.01*
Product number: 11800
Instantly available
Shipping until , if you place your order within the next .
1-Wire Dual Reed contact module, board
Unassembled printed circuit board for the assembly of a 1-Wire dual reed contact module.With the 1-Wire Dual Reed Contact Sensor Module two independent reed contacts (magnetic switches) can be monitored.The sensor can be used, for example, to monitor a window, door or garage door.
1-Wire interface
DS2413 Dual I/O
Dimensions
85,8x30,5mm
Connection
Screw terminals for 1-Wire bus and input voltage (up to 2.5qmm possible)
Supply voltage
1-Wire Bus with 5V and 12V
Power consumption
5V approx. 1mA, 12V approx. 5mA (both inputs active)
Isolation
Inputs electrically connected with 1-Wire bus
Installation
intended for top hat rail housing (switch cabinet installation)
Scope of delivery
Unassembled board in industrial quality without components or housing.Building instructions per download
Cable length between sensor and module
It is recommended to use max. 10m cable length.
Labelling
CE
Protection class
III
Note: SMD components must be soldered on the board
From
€7.11*
Product number: 11809
Instantly available
Shipping until , if you place your order within the next .
1-Wire switching module Dual 230V 5A top hat rail mounting, board
Unassembled printed circuit board for the assembly of a 1-Wire dual switch module.With the Dual Switching Module, two direct current or alternating current consumers can be switched independently of each other. By interconnecting the two channels it is possible to control awnings or tubular motors (roller shutters) (mech. relay version). The module is available in two versions.
1-Wire switch module Dual mech. relay By 5A
- Change-over relay for switching AC or DC consumers, all contacts of the relay are led outside- - control of tubular motors for awnings or roller shutters possible
1-Wire Switch Module Dual Electronic Load Relay, Solid State Relay 5A
Electronic load relays are the modern way to switch 230V consumers. The switching process is carried out by electronic switches, so there are no malfunctions and no wear and tear of switching contacts as with mechanical relay devices.- Gentle switching of AC 230V consumers - Increased service life of lamps due to zero-crossing control- Practically wear-free
Switching current
5A for mech. relay and electronic relay
Installation
The 1-Wire Dual switch module is designed for control cabinet installation (top-hat rail).
Power consumption
5V approx. 1mA, 12V (both outputs active) approx. 30mA
Supply voltage
1-Wire Bus, 5V and 12V
Connection
Screw terminals
Protection class
II
Accessories
DS2413 Dual I/O module, top hat rail housing (HUT 2), Elect. Load relays
Scope of delivery
Unassembled board in industrial quality without components or housing. Building instructions per downloadNote:SMD components must be soldered on the board.
From
€8.01*
Product number: 11801
Instantly available
Shipping until , if you place your order within the next .
1-Wire Hub II AC with integrated power supply unit
unpopulated printed circuit board for the construction of a 1-Wire Hub II AC.
The 1-Wire Hub II AC is the central module for building a 1-Wire network. Combination with all 1-Wire devices possible. Designed for control cabinet installation (top hat rail mounting).
Via the 1-Wire hub the 1-Wire bus is supplied with 5V and 12V voltage. If the output power of the 1-Wire hub is not sufficient, additional power can be supplied by an external power supply (15V - 24V). Options:- Voltage monitoring of the 5V and 12V voltages by 1-Wire - Voltage and current monitoring of the 5V and 12V by 1-Wire
Supply voltage
230VAC
Output
5V 0.1A, 12V 0.2A (sum of 5V and 12V 4.5W)
LED indicator
5V voltage, 1-Wire activity
Dimensions
85 x 77mm, intended for HUT4 top hat rail housing
Connection
Screw connection
Scope of delivery
Unassembled board in industrial quality without components or housing. Building instructions per download
Note: SMD components must be soldered on the board, depending on the assembly option.
From
€9.81*
Product number: 11812
Instantly available
Shipping until , if you place your order within the next .
1-Wire Dual S0 counter, board
Unassembled printed circuit board for the construction of a 1-Wire Dual Counter.
Counter module is designed for energy metering of two independent electricity, water and gas meters. All S0 devices manufactured according to DIN 43864 with isolated S0 interface can be connected. The counted pulse states are maintained for several days by the internal voltage buffering and can be read out via the 1-wire BUS with a time delay. A maintenance-free GoldCap (high-performance capacitor) is integrated to buffer the meter values.
Note: The counter reading cannot be reset. Accessories: IC DS2423 (counter module)Installation note: The 1-Wire Dual S0 counter is designed for panel mountingConnection: 2 S0 counter inputs via screw terminal Supply voltage: 5V 1-Wire Bus, no additional external power supply necessary!Power consumption: 5V, both LED's active 4mA Scope of delivery: Unassembled industrial quality board without components or housing. Building instructions per downloadNote: Small SMD components must be soldered on the board.
From
€8.01*
Product number: 11804
Instantly available
Shipping until , if you place your order within the next .
1-Wire Dual Display Board
Designed for mounting two 3mm or 5mm display LEDs inside the 32mm DIN rail housing art. no. 94002. For the electrical connection to the motherboards, a post plug for ribbon cable is provided. The board is fastened in the upper part of the top-hat rail housing with two screws.The board can be combined with the following ESERA boards:
1-Wire Dual S0 Counter, Art.No. 120041-Wire Dual Switch Module, Art.No. 120011-Wire Dual Digital Input, Art.No. 120001-Wire 3-fold analog input, Art.No. 12010 1-Wire Dual Reed Contact, Art.No. 12009
Dimensions: 55 x 29 mm
Design: double-sided printed circuit board, industrial design
Scope of delivery: unassembled printed circuit board, without components and screws
Installation: Designed for DIN rail housing Dimensions: 65 x 55mm (WxH) Scope of delivery: Unassembled industrial quality board without components or housing. Building instructions per download
Further information, like program examples, data sheets or drivers can be found in our download area
From
€4.41*
Product number: 11813
Instantly available
Shipping until , if you place your order within the next .
1-Wire temperature, humidity and brightness living room sensor, surface mounting, unassembled board
Unassembled board for the construction of a living room sensor for temperature, humidity and brightness. The circuit boards are industrially manufactured, plated through and provided with solder resist. The product photo of the assembled PCB shows only an example of a completely assembled board.
Printed circuit board for Multisensor / living space sensor for accurate temperature and humidity measurement. A DS18B20 sensor is used for temperature measurement, and a high-precision Honeywell sensor is provided for humidity measurement. The light sensor has a measuring behaviour similar to the human eye and therefore reacts specifically to visible light and not to UV light as with many sensors. The light sensor is suitable for detecting sunrise/set.
Scope of delivery: Unassembled board in industrial quality without components or housing. Building instructions per downloadNote: SMD components must be assembled on the board.
1-Wire components
DS18B20, temperatureDS2438 Multisensor for air humidity
Temperature sensor
DS18B20
Accuracy
0.5° in the range of -10°C - 85°C
Resolution
9-12 bits, 0.5°C-0.0625°C/bit, depending on the selected resolution
Air humidity sensor
Capacitive sensor (Honeywell HIH4000 series)
Accuracy
3-8% in the range of 5-95% relative humidity (non-condensing)
Repeatability
0,5%
brightness sensor
Sensor adapted to the sensitivity of the human eye
Measuring range
2 - 7000 lux
Resolution
9 bit, approx. 0.32% humidity
1-Wire connection
3 - conductor connection (data, ground and 5V, parasitic operation not supported)
Operating voltage
5 V= (+/-10%)
Power consumption
max.2mA
Connection:
RJ45 modular socket and Push In terminal
Dimensions
Printed circuit board: 67 x 67mm (LxWxH)Installed in sensor housing: 71 x 71 x 32mm (LxWxH)
From
€8.01*
Product number: 11805
Instantly available
Shipping until , if you place your order within the next .