1-Wire controller / 1-Wire gateway / Intelligent interfaces

1-Wire Controller / 1-Wire Gateway* - Open Interface for Smart Home / Smart Systems

The 1-Wire controller / 1-Wire gateway can also be described as an intelligent (bus) interface and assumes the function of a gateway in automation. The 1-Wire controller / 1-Wire gateway from ESERA makes it possible to combine sensors, actuators (switching modules) and control software independently of the manufacturer. The 1-Wire controller and 1-Wire gateway can be optimally combined with the central controller, ESERA Station 200.

*The 1-Wire gateway and the 1-Wire controller only differentiate the protocol that is passed on. Devices with MODBUS protocol are called 1-Wire Gateway, devices with ASCII protocol are called 1-Wire Controller.

Data interface with completely accessible protocol 

The 1-Wire controller / 1-Wire gateway passes on information, e.g. from temperature sensors, as a text protocol or Modbus protocol. Thanks to this "easy language", it acts as an "interpreter" and enables all common controllers to be connected to the ESERA automation system.

Simply clever even without programming

The 1-Wire Controller / 1-Wire Gateway makes the commissioning of Smart Home or Smart Systems extremely simple: It automatically recognizes which components are connected by unique numbering in the sensors and actuators. It then outputs a legible text log of the data supplied. In the "Config. Tool" from ESERA (software included in the controller) this information is displayed without additional programming. The software was designed for commissioning, testing or maintenance.

Advantages:

• For the installer, electrician & smart home integrator
• Save yourself cost-intensive training. With the 1-Wire Controller / 1-Wire Gateway you can use control software you already know . Here you will find an overview of compatible controllers.
• The 1-Wire Controller / 1-Wire Gateway provides you with your data already prepared - without additional programming.
• For smart "home builders
• Integrate a controller that meets your requirements and needs, e.g. according to
• Functionality
• User-friendliness: visualization and control

Functionality

The 1-Wire Controller / 1-Wire Gateway is a self-sufficient subsystem between the 1-Wire network and a computer or PLC control.

• Simple integration of 1-Wire sensors, actuators (switch modules) or iButton access keys to all central units, such as ESERA Station 200, PLC or PC systems
• Reliable and autonomous management of the 1-Wire network
• Independent detection of 1-Wire sensors and actuators (switching modules)
• Reads the 1-Wire devices at very high speed
• Cyclic delivery of current values, formatted data output as ASCII text, e.g. temperature in plain text
• Extensive configuration and formatting options (e.g. via ESERA Config-Tool II)
• Up to 30 1-Wire devices can be read out in parasitic and standard mode in 1-2 second cycles
• Suitable for all 1-Wire network sizes

A further knowledge of the 1-Wire protocol is not necessary on the part of the user. The 1-Wire controller / 1-Wire gateway takes over the entire work with the 1-Wire components. Working with 1-Wire devices or chips could not be easier. You can concentrate on evaluation and storage.

Video instructions

In these video tutorials we show you how to commission and update a 1-Wire Controller / 1-Wire Gateway step by step

• Initial commissioning 1-Wire Controller / 1-Wire Gateway
• Perform firmware update

Just start it up:

With our Start-up sets you can quickly and easily try out the ESERA 1-Wire system.

• Our tip: 1-Wire Startset Pro 200 with video instructions