
Quantity | Unit price |
---|---|
To 49 | €59.90 * |
From 50 | €58.10 * |
Prices incl. VAT plus shipping costs
Delivery time 1-3 Workdays
- Order number: 11211
- Open text field 1: DE30249510
The 1-Wire S0 Meter Pro is designed for energy metering of two independent electricity, water and gas meters or the wind turbine. All S0 energy meters manufactured according to DIN 43864 can be reliably measured. Due to the high-quality electronics of the 1-Wire S0 Meter Pro, energy meters can also be reliably recorded with very high pulse frequencies of up to 300 Hz. The S0 meter values are made available via a 1-Wire bus interface.
In the event of a power failure, the S0 meter values are permanently stored internally for at least 99 years.
Inputs | 2 x S0 pulse input (counter) for 2 energy meters or wind sensor |
Supply voltage | 12V 1-Wire Bus |
Power consumption | 10mA, both inputs active |
S0 Interface | 10V and approx. 4mA working level, according to DIN 43864 |
Counter range / scope | 32 bit counter per S0 input |
Data preservation / storage | Permanent storage of meter values for up to 99 years in the event of a power failure |
Data interface | 1-Wire Interface, DS2423 command set (GND, Data and 12V) |
Operating voltage | 12VDC (+10% / -20%) |
Power consumption | max. 10mA |
Operating frequency S0 Input | max. 300Hz |
Connection | Screw terminals for 1-Wire bus and S0 inputs up to 2,5qmm cable cross section |
Dimensions | 1HP, 17 x 71x 90mm (WxHxD) |
Protection class | III |
Note | The counter value can be reset via push button on the front panel |
Installation | Designed for control cabinet installation (top hat rail) |
Scope of delivery | Finished device and operating instructions |
Downloads
"1-Wire Dual S0 counter module PRO"
funktioniert prima mit IP-Symcon, lese damit Windstärke und Wasserverbrauch aus.
Die neue Variante ist platzsparender und benötigt keine 12V mehr, prima
Sehr kleiner Bauraum,
hochwertige Verarbeitung,
Bei mir in Verbindung mit dem LAN-Controller im Einsatz.
Arbeitet zuverlässig ohne Wartung