1-Wire multisensors Humidity, temperature, brightness Sensor

1-Wire multi-sensors: humidity, temperature and brightness in one sensor

With the 1-Wire multisensors from ESERA, the following parameters can be recorded via 1-Wire bus:

  • Air humidity
  • Temperature
  • Brightness

The following high-precision sensors are used:

  • Air humidity sensor DS2438: Capacitive sensor, DS2438, 0% to 100% relative humidity
  • Temperature sensor DS18B20: -40°C to +60°C, limited by housing (sensor element: -10°C to +125°C) additional DS18B20 temperature sensor
  • Light sensor DS2438: measuring behaviour simulating the human eye (not UV light).
    • Note on flush-mounted sensors: This sensor is suitable for rough detection of brightness or darkness (e.g. whether the light in a room is on or off). This is due to the installation in a flush-mounted housing. This sensor cannot be used to implement brightness dependent light control. For this purpose you can use e.g. the surface-mounted variants or Art. No. 11129 - Use brightness and temperature sensor.

Versions:

Advantages of the 1-Wire multi-sensors from ESERA

Optimal living climate and prevention of mould

Record the relative humidity and temperature in living rooms, ventilation systems, cellar rooms or outdoors and optimise your living climate. You also prevent mould in living spaces. Especially in passive or low-energy houses, renovated blocks of flats and houses with full thermal insulation, our 1-wire humidity sensors are very important, because these houses can no longer release humidity uncontrollably and it is very easy for "black corners" or mould to form.

Individual room control with high comfort factor and energy optimization

In combination with binary outputs and electric radiator actuators, the 1-Wire multisensors allow you to implement an intelligent heating control system that not only saves energy but also optimises your living comfort. Learn more about intelligent heating control here.

High-quality and accurate sensors at a reasonable price

Despite the low price, very high quality sensors and original 1-Wire components (DS2438 and DS18B20) are used. These sensors are very accurate and do not need to be calibrated.

1-Wire multi-sensors: humidity, temperature and brightness in one sensor With the 1-Wire multisensors from ESERA, the following parameters can be recorded via 1-Wire bus : Air humidity... read more »
Close window
1-Wire multisensors Humidity, temperature, brightness Sensor

1-Wire multi-sensors: humidity, temperature and brightness in one sensor

With the 1-Wire multisensors from ESERA, the following parameters can be recorded via 1-Wire bus:

  • Air humidity
  • Temperature
  • Brightness

The following high-precision sensors are used:

  • Air humidity sensor DS2438: Capacitive sensor, DS2438, 0% to 100% relative humidity
  • Temperature sensor DS18B20: -40°C to +60°C, limited by housing (sensor element: -10°C to +125°C) additional DS18B20 temperature sensor
  • Light sensor DS2438: measuring behaviour simulating the human eye (not UV light).
    • Note on flush-mounted sensors: This sensor is suitable for rough detection of brightness or darkness (e.g. whether the light in a room is on or off). This is due to the installation in a flush-mounted housing. This sensor cannot be used to implement brightness dependent light control. For this purpose you can use e.g. the surface-mounted variants or Art. No. 11129 - Use brightness and temperature sensor.

Versions:

Advantages of the 1-Wire multi-sensors from ESERA

Optimal living climate and prevention of mould

Record the relative humidity and temperature in living rooms, ventilation systems, cellar rooms or outdoors and optimise your living climate. You also prevent mould in living spaces. Especially in passive or low-energy houses, renovated blocks of flats and houses with full thermal insulation, our 1-wire humidity sensors are very important, because these houses can no longer release humidity uncontrollably and it is very easy for "black corners" or mould to form.

Individual room control with high comfort factor and energy optimization

In combination with binary outputs and electric radiator actuators, the 1-Wire multisensors allow you to implement an intelligent heating control system that not only saves energy but also optimises your living comfort. Learn more about intelligent heating control here.

High-quality and accurate sensors at a reasonable price

Despite the low price, very high quality sensors and original 1-Wire components (DS2438 and DS18B20) are used. These sensors are very accurate and do not need to be calibrated.

Close filters
 
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 
No results were found for the filter!
Hint!
Brochure 1-Controller / 1-Wire Gateway
Brochure 1-Controller / 1-Wire Gateway
ESERA brochure 1-Wire Controller and 1-Wire Gateway Overview of 1-Wire Controllers and 1-Wire Gateway for IoT (Internet of Things), Industry 4.0, Smart Automation, Smart Building, Smart Home for private, commercial and OEM Product overview of the 1-Wire controller and 1-Wire gateway products as paper or download version. The ESERA automation team wishes you a lot of fun...
€0.01 *
Hint!
ESERA Produktkatalog 2018-2019
Product Catalogue PDF Download
ESERA Product Catalogue IoT (Internet of Things), Industry 4.0, Smart Automation, Smart Building, Smart Home for private, commercial and OEM 2020 - 2021 Selected products for 1-Wire, central control and eBus can be found in our new catalogue. The ESERA automation team wishes you a lot of fun while browsing.
€0.01 *
1-Wire multi sensor for temperature, humidity, brightness, outdoor, surface
1-Wire multi sensor for temperature, humidity,...
1-Wire outdoor Multisensor surface-mounted for temperature, humidity and brightness Standard The 1-Wire Multisensor Outdoor is designed for permanent installation in rain and weather protected outdoor areas. The sensor can also be used in rooms with permanently high humidity, e.g. conservatories, saunas or cellars. The sensors must be protected from rain or other direct...
€68.14 *
1-Wire Multisensor Pro temperature, humidity living room flush-mounted for Berker, Jung, Merten
1-Wire Multisensor Pro temperature, humidity...
1-Wire Multisensor Pro flush mount for temperature and humidity Universal With this Multisensor it is now easy to integrate temperature, humidity via 1-Wire bus into all standard 55mm switch ranges of the manufacturers Berker, Jung etc. You use the colour-matching cover and, if necessary, an adapter ring from our accessories range and combine it with your existing switch...
From €58.39 * €68.14 *
1-Wire multi sensor for temperature, humidity, brightness, indoor, surface
1-Wire multi sensor for temperature, humidity,...
1-Wire Multisensor surface-mounted for temperature, humidity and brightness Standard With the multi-sensor a simple monitoring and recording of the indoor climate is possible. For heating systems (individual room control) and ventilation systems it is an important sensor to achieve a good and stable control of temperature/humidity. The living room sensor is also ideal for...
€53.52 *
11132 1-Wire Multisensor
1-Wire multisensor: temperature, humidity,...
1-Wire flush-mounted living space Sensor for temperature, humidity and brightness Universal Assembly: With this sensor module it is now easy to integrate temperature, humidity and brightness via a 1-wire bus into all standard 50mm and 55mm switch ranges from the manufacturers Berker, Jung, Gira, Busch-Jaeger, Merten and many others. You use the colour-matching cover and, if...
From €49.49 *
11152 Multisensor
1-Wire Multisensor Pro Air Humidity and...
Elegant Multi-sensor for humidity and temperature Pro for 1-Wire bus system for professional applications, such as public institutions, authorities, machines etc. Highlights: High measuring accuracy for temperature, humidity (200 - 300% more accurate than standard 1-Wire sensors) small power input Processing of the sensor values, therefore no complex formulas necessary...
From €58.39 * €68.14 *
Viewed