Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 11319
- Open text field 1: DE30249510
1-Wire Controller 1 Ethernet, the intelligent system interface to all Smart Home controllers
Whichever system you want to use, the intelligent system interface (1-Wire Controller 1) is ready for it.
If you have e.g. a controller from Loxone, WAGO, Smart1, IP-Symcon, BAB technology, ..., no problem. All systems can access 1-Wire sensors and actuators via the intelligent interface (1-Wire Controller 1).
The 1-Wire Controller 1 enables the integration of all 1-Wire sensors to all controllers such as PLC or PC systems without having special knowledge of the 1-Wire protocol. The 1-Wire Controller 1 represents the self-sufficient management of 1-Wire sensors and 1-Wire actuators (e.g. switch modules) of a 1-Wire network. It automatically detects new 1-Wire sensors / actuators and cyclically delivers the tested and sensor-adapted values. The output is formatted as ASCII characters and sent via the computer interface to your controller. For example, temperature sensors provide you with the temperature in C° plain text.
The device has extensive configuration and formatting options, which can be read and operated using ESERA Config-Tool 3 or a terminal program (e.g. Hercules).
Up to 30 1-Wire devices can be read out in parasitic and standard mode every 2 seconds (parasitic system dimming is limited to approx. 5-8 temperature sensors). The 1-Wire interface is designed for operation for all sizes of a 1-Wire network.
Would you like to know what the difference is between a blue USB adapter, a 1-Wire bus coupler and the 1-Wire controller? Yes, here you will find a comparison of functions and equipment.
Data interface | 1-Wire to Ethernet (TCP/IP or UDP) |
Number of 1-Wire and iButton devices | 30 pieces |
Supported Chips | DS2401 (electronic key (iButton)), DS1820, DS18S20, DS18B20, DS2405, DS2406, DS2413, DS2408, DS2423, DS2438 and DS2450 |
Supply voltage | 9-30VDC |
Output 1-Wire Interface | GND, Data, +5V max.0.2A |
Dimensions | 2HP, 32 x 71x 90mm (WxHxD) |
Assembly | Designed for top hat rail |
Connection | Screw terminals |
Scope of delivery | module (without power supply) and operating instructions. Program for configuration and readout as download |
Downloads
"1-Wire Controller 1, intelligent system interface"
- Unterschied 1-Wire Adapter - Buskoppler - Controller
- Grundlagen 1-Wire Bus, eBOOK
- Einbindung in WAGO System
- Einbindung in IP-Symcon
- Einbindung in Loxone Miniserver
- Haben Sie Interesse dieses Produkt in OEM-Ausführung zu beziehen?
- Download Software und Firmware
- Firmware Update Support Video
- Einbindung in FHEM
- Programmierhandbuch Controller/Gateway/Station, PDF
- Konfiguration, Anleitung für Config-Tool 3, PDF
- Anschlussbeispiel 1
- Anschlussbeispiel-7
- Anschlussbeispiel
- Anschlussbeispiel 2
- Anschlussbeispiel 5
- Anschlussbeispiel 6
- Anschlussbeispiel 3
- Anschlussbeispiel 4
- Manual
- Konformitaetserklaerung
- Anschlussplan
- Bedienungsanleitung
- Config Tool Software, ZIP
- Programming Manual Controller/Gateway/Station, English, PDF
- Technische Downloads
- ESERA-Automation
Läuft bestens an IPS.
Bin sehr zufrieden.
Super Support, hochwertige Verarbeitung, leicht zu bedienen, universell einsetzbar durch großen Spannungsbereich.
Erkennt die Busteilnehmer selbständig und zuverlässig!
Rundum ein sehr durchdachtes Gerät.
Läuft wunderbar via UDP Socket mit IP Symcon.
Sehr zu empfehlen gerade wenn man Probleme hat mit den Treibern.